Non-Metallic Conduit & Fittings

CER 1 NESCO 1 VENMAR VENTILATION 1

Broan-Nutone 1 Canadian Electrical Raceways 1 Nesco 1 SCEPTER 1

ENT Form Stubby 3 Flexible Conduit 3 Bushing 19 Liquidtight Connector 14 Reducing Bushing 13 Adapter 11 End Cap 10 Insulating Bushing 9 Bell End 7 Knockout Bushing 6 Type LL Conduit Body 6 Type LR Conduit Body 6 Type T Conduit Body 6 Sealing Ring with Steel Retainer 5 Snap-In Connector 5 Anti-Short Bushing 4 Conduit To Duct Adapter 4 Sleeve 4 Reducing Coupling 3 Strain Relief Cord Connector 3 Stub Down Fitting 3 Telephone Elbow 3 Type TB Conduit Body 3 Angled Form Stubby 2 Bell End Coupling 2 Cap 2 DBII Coupling 2 Duct Pipe 2 Duct To PVC Conduit Reducing Adapter 2 ENT Stubby Angled Adapter 2 Gasket 2 Long Sweep Bend 2 Meter Conduit Hub 2 Meter Offset 2 Rapid Fire Lumex Connector 2 Screw Connector 2 Cable Connector 1 Conduit Connector 1 DBII Pipe Conduit 1 DBII Rigid Conduit 1 ENT Stubby Adapter 1 Extension Ring 1 Junction Box Adapter 1 Liquidtight Connector with Sleeve 1 Offset Nipple 1 Strain Relief Dome Connector 1 Stubbies 1 Super Duct Pipe 1 Sweep Elbow 1

Polyurethane, Helix of Rigid Plastic Filament 4 Neoprene 2 Nylon 6/6 2 Helix of Rigid PVC 1 High-Impact Thermoplastic 1 Non-Metallic 1 Polyamide 1 Polyamide 6, Neoprene Seal 1 Polypropylene 1

Carlon® 3 Snap2It 3 Unilet 3 Cor-Line®, Kwikon 2 Rack-A-Tiers 2 Unilets 2 Zero to 90 2 Snap2It, Zero to 90 1 Super Duct, Tele-Duct 1

Liquidtight Sealing Gasket 8 Non-Metallic 8 90° 7 Sealing Ring for Conduit 5 Type II P, Rigid 5 Flexible, Non-Metallic 4 Insulating 4 Open 3 Solid gasket for use with Form 35 conduit bodies 3 Straight, Flexible, Non-Metallic 3 90°, Flexible, Non-Metallic 2 ANGLED FORM STUBBY 2 Concrete Tight 2 Flexible, Concrete Tight 2 Home Improvement & Commercial Supplies - Electrical Cable & Wire 2 JUNCTION BOX ADPT 2 METER OFFSET 2 Non Corrosive, Oval 2 Straight, Concrete Tight 2 90°, Flexible, Straight, Non-Metallic 1 90°, Non-Metallic, Plug-in 1 CSA Type II 1 Concrete Tight, Straight 1 Connector 1 Connectors-Straight 1 ENT FORM STUBBY 1 Flat Sealing, Solid, Screw On 1 Liquidtight 1 Liquidtight Fittings 1 Liquidtight, Dome 1 Nonmetallic Sheathed Cable Fitting 1 O-RING EXPANSION JOINT 1 Solid gasket for use with Form 85 conduit bodies 1 Square 1 Straight, Flexible, Revolving Thread 1 Straight, Low Profile 1 Straight, Revolving Thread 1 THR STUBDOWN 1 Type II 1 Type TB ACCESS FITTING 1

3 x 2 in 2 3/4 x 1/2 in 2 4 x 2 in 2 4 x 3 in 2 6 in 2 #0 1 1 x 1/2 in 1 1-1/2 x 1-1/4 in 1 1-1/4 x 1 in 1 1-3/8 in 1 1.109 in 1 1.734 in 1 1.984 in 1 2 - 2-1/2 in 1 2 x 1 in 1 2 x 1-1/2 in 1 2 x 1-1/4 in 1 2 x 4 in 1 2-1/2 x 2 in 1 2.469 in 1 3 x 2-1/2 in 1 7/8 in 1

5 in 2 #1 1 #2 1 #3 1 #4 1 2-1/2 - 3 in 1 6 in 1

Spigot x Spigot 2 Nail/Screw 1 Plug-in, Solvent Weld 1 Snap-in 1 Socket x Spigot 1 Solvent Weld x Spigot, Plug-in 1 Spigot x Threaded 1

500 ft 4 100.0 ft 2 15/16 in 2 2.0 in 2 36.195 mm 2 1-11/32 in 1 1.289 in 1 1.77 in 1 100 ft 1 106.68 mm 1 1500 ft 1 3.01 in 1 3.53 in 1 300 ft/Coil 1 37.465 mm 1 370 ft 1 4 in 1 45.46 mm 1 49.53 mm 1 59.055 mm 1 59.207 mm 1 60.35 mm 1 61.595 mm 1 64.77 mm 1 70.231 mm 1 8 ft 1 80.01 mm 1 89.916 mm 1

31.75 mm OD 1 38.1 mm OD 1 63.5 mm OD 1 76.2 mm OD 1 1 1/4 in 4 1 1/2 in 2 1/2 in 2 7/8 in 2 0.5 in 1 0.75 in 1 0.84 in 1 1 in 1 1.029 in 1 1.05 in 1 1.31 in 1 1.61 in ID x 1.9 in OD 1 12.3 - 12.8 mm ID x 18 - 18.03 mm OD 1 127 mm ID 1 128.19 mm ID x 141.3 mm OD 1 15.8 mm ID x 21.3 mm OD 1 19.05 mm 1 20.8 mm ID x 26.7 mm OD 1 20.8 mm ID x 26.7 mm in OD 1 21/32 in 1 25.4 mm 1 26.4 mm ID x 33.4 mm OD 1 5 in 1

Locknut 1 Screw 1 Solvent Weld 1 Straight 1

14/3-10/3 AWG 1